The mixed content fixer is activated, but was not detected on the frontpage.

Home Forums General issues The mixed content fixer is activated, but was not detected on the frontpage.

This topic contains 122 replies, has 4 voices, and was last updated by  Mark Wolters 20 hours, 16 minutes ago.

Viewing 30 posts - 91 through 120 (of 123 total)
  • Author
    Posts
  • #94232 Reply

    Mark Wolters
    Keymaster

    It depends on your hosting provider if you can do it yourself or not. I’d suggest to contact them about this, they can tell you exactly what to do.

    Mark

    #94279 Reply

    Tony

    Hello

    the problem is resolved. Thanks for your help. Very good support.

    #94549 Reply

    Giuseppe

    I see yellow lock in the backend and get this:
    “The mixed content fixer is active, but was not detected on the frontpage…”
    Please could you help me

    #94584 Reply

    Mark Wolters
    Keymaster

    Hi Giuseppe,

    this often happens because of issues with the certificate. Really Simple SSL is not a certificate itself and requires a valid certificate before it can work correctly. You can check if the certificate is valid over at https://ssllabs.com/ssltest. If you do have a valid certificate there might be an issue with mixed content. To locate mixed content you can use the following guide: https://really-simple-ssl.com/knowledge-base/how-to-track-down-mixed-content-or-insecure-content/

    Mark

    #94640 Reply

    Giuseppe

    Thanks a lot Mark!

    #95580 Reply

    Volkan Koç

    Hello,

    Everything is good except this:

    “The mixed content fixer is activated, but was not detected on the frontpage. Please follow these steps to check if the mixed content fixer is working.”

    – I have valid SSL. The grade is A.
    – I just checked manually and couldn’t find data-rsssl=1 on the page source.

    What’s the problem about this error? How can I fix this?

    Thank you for your help.

    #95594 Reply

    Assuming you tried the other options, did you also try step 5 here?
    https://really-simple-ssl.com/knowledge-base/how-to-check-if-the-mixed-content-fixer-is-active/

    If using the “switch mixed content fixer hook” option does not help, there’s probably a plugin conflict. You could check this be deactivating plugins and see if this resolves the problem.

    #98146 Reply

    Bruno

    Hi,
    I created website using wordpress. Addes all i needed, and i went to put ssl. but after i instaled plugin in it all go bad.
    I got this:

    success SSL is enabled on your site.
    error The mixed content fixer is active, but was not detected on the frontpage. Please follow these steps to check if the mixed content fixer is working. Instructions
    success An SSL certificate was detected on your site.
    success 301 redirect to https set: WordPress redirect

    And debug report:
    Options:
    * WordPress redirect
    * Mixed content fixer
    SERVER: apache
    SSL is enabled for this site
    ** Detecting configuration **
    plugin version: 2.5.26
    Already on SSL, start detecting configuration
    SSL type: LOADBALANCER
    ** Configuring SSL **
    testing htaccess rules…
    test page url, enter in browser to check manually: https://logpromet.cf/wp-content/plugins/really-simple-ssl/testssl/loadbalancer/ssl-test-page.html
    htaccess rules test failed with error: cURL error 60: SSL certificate problem: self signed certificate
    checking if .htaccess can or should be edited…
    .htaccess does not contain default Really Simple SSL redirect
    retrieving redirect rules
    converting siteurl and homeurl to https

    my website url: logpromet.cf

    #98148 Reply

    Your SSL certificate has issues. See for details on your certificate this scan:
    https://www.ssllabs.com/ssltest/analyze.html?d=logpromet.cf

    #101006 Reply

    STEVE DUFFIS GORDON

    Hello Rogier,

    I have this problem with mgmnj.org

    I bought a Multidomain certificate to cover http://www.mahanaimgroupministries.org and mgmnj.org

    This week we decided that all the content from https://www.mahanaimgroupministries.org/ need to go to mgmnj.org

    I migrated the website and made sure everything is in order but for some reason I keep getting this mismatch domain or the mixer content is active but not detected on the front page.

    Please help?

    #101251 Reply

    Mark Wolters
    Keymaster

    Hi Steve,

    the site is in a redirect loop. What this means is that both a redirect to http:// and https:// are active at the same time. They will continue to point to eachother, thus resulting in the redirect loop.

    To fix this, one of the redirects has to be removed. The easiest way to make the site available again is to deactivate Really Simple SSL via the force-deactivate script included with the plugin. For instructions on how to do this see: https://really-simple-ssl.com/knowledge-base/uninstall-websitebackend-not-accessible/.

    This will remove the redirect to https:// and should make the site available over http://. Once that is done you can start locating the redirect to http:// and remove it so activating the plugin again doesn’t result in another redirect loop. For the most common causes of a redirect loop see: https://really-simple-ssl.com/knowledge-base/my-website-is-in-a-redirect-loop/.

    Mark

    #102937 Reply

    Mamdouh

    hi there. I’ve been getting “The mixed content fixer is active, but was not detected on the frontpage” error. This is my website (suppliesmedicalstore.com).

    #103106 Reply

    Mark Wolters
    Keymaster

    Hi,

    this is happening because there is an issue with your SSL certificate. The certificate that’s currently used is a default certificate from Hostgator (see https://www.ssllabs.com/ssltest/analyze.html?d=suppliesmedicalstore.com). To fix this, a valid certificate needs to be installed. Really Simple SSL is not a certificate itself and cannot obtain or install a certificate for you. We recommend to obtain a certificate at your hosting provider, they will have access to the server and can install the certificate for you.

    Mark

    #105926 Reply

    Dhruv

    Pls help to solve this error
    “The mixed content fixer is active, but was not detected on the frontpage”
    Website : techygyan.ga

    #110271 Reply

    jagan

    Hi
    i have installed plugin and activated, but showing mixed content error, and HTTPS red alert,

    please help me to solve this issue,
    99land.com

    thanks
    jagan.k

    #110315 Reply

    Mark Wolters
    Keymaster

    Hi Jagan,

    your site doesn’t have a valid SSL certificate. Really Simple SSL is not an SSL certificate itself but a tool to configure your website for SSL. To fix this, you need to install a valid SSL certificate which is issued by a certified certificate provider like Comodo or Let’s Encrypt. Your hosting provider can help you with this, they will have access to the server and can obtain and install a certificate for you. Once a valid certificate is installed, the site should work on SSL.

    Mark

    #111979 Reply

    navy

    Hi I have problem with certificate,my domain: carmann.pl
    what i verification
    I don’t have green padlock,
    I remove all plugin
    I check data-rsssl

    can you help me find i what i doing wrong?

    #112040 Reply

    Please run a scan on SSL labs: https://ssllabs.com/ssltest. You will see your certificate is not valid. You can contact your hosting company to install a valid SSL certificate.

    #112057 Reply

    Naveen sharma

    Hi, Can you help me fix the error “The mixed content fixer is activated, but was not detected on the frontpage“.

    My site : netwayinfo.com

    #112080 Reply
    #115090 Reply

    Tanmoy

    The mixed content fixer is active, but was not detected on the frontpage. Please follow these steps to check if the mixed content fixer is working.
    <body data-rsssl=1> still showing
    But i do not see any mixed content in my website. please suggest me how can i fix this issues. also show following issues

    This page is not secure (broken HTTPS).
    My website : https://incentivemarketinggroup.com/

    Thanks

    #115193 Reply

    Mark Wolters
    Keymaster

    Hi,

    the site uses a certificate for another domain (https://www.ssllabs.com/ssltest/analyze.html?d=incentivemarketinggroup.com). To fix this, the incentivemarketinggroup.com domain has to be added to the certificate. This is something your hosting provider can help you with, Really Simple SSL is a tool to configure your website for SSL and not a certificate itself.

    Mark

    #115430 Reply

    Tanmoy

    HI sir,

    Your plugin super but my website show errors so please give me best suggestions i active SSL in my server or hosting but show errors message my website.

    Really Simple SSL failed to detect a valid SSL certificate. If you do have an SSL certificate, try to reload this page over https by clicking this button:
    Really Simple SSL requires a valid SSL certificate. You can check your certificate on Qualys SSL Labs.

    So my request please help me . please sir

    Thanks

    #115435 Reply
    #115479 Reply

    Claudia

    Just purchase really simple ssl pro. I’m still getting the proceed to safety message on my site. SSL is detected and license is active. Not sure what what to check.

    #115567 Reply

    Mark Wolters
    Keymaster

    Hi Claudia,

    it sounds like there might be an issue with your certificate. Can you go to https://www.ssllabs.com/ssltest and see if your certificate checks out?

    Mark

    #115740 Reply

    Eugénie

    Hello,

    I am having the same issue/same error message “The mixed content fixer is active, but was not detected on the frontpage” with both websites: http://www.apobookkeeping.com and http://mybloomingbiz.com and it’s so frustrating. Both certificates are valid A rating, but I don’t know how to make SSL Secure lock work and be visible on the homepage. Can you please help me fix this once and for all? Thanks much!

    #115769 Reply

    Your SSL certificate is fine, but your site is still loading some resources over http:// because your theme has a hardcoded http:// link to Google Fonts. Here you can find instructions how to track this file down:
    https://really-simple-ssl.com/knowledge-base/how-to-track-down-mixed-content-or-insecure-content/

    If you change it to https, the green lock will show.

    #115962 Reply

    Eugénie

    OMG! Thank you soooo soooo very much Rogier 🙂 It’s fixed!!! So glad I asked…and you could help. I’m bookmarking this link.

    #119008 Reply

    Brian Harness

    Hello,

    Thank You for wonderful plugin. Ive used on other sites. This site is giving me problem and I do everything the exact same so Im not sure what the problem is, It says SSL is activated but then it says cant detect on homepage. I read other article and Ive tried disabling a plugin called Limit Login Attempts, this didnt help, other than that I would not know what other 4 plugins it could be. They have nothing to do with cookies and cache. Please any help, as Im really needing this site to have SSL.

    Thank You
    Brian

Viewing 30 posts - 91 through 120 (of 123 total)
Reply To: The mixed content fixer is activated, but was not detected on the frontpage.
Your information: